A modern garage with a black and gold metallic epoxy floor
Bayshore Epoxy Floors

Transform your SoHo garage with a high-gloss epoxy floor

Epoxy floors along South Howard: townhome garages, bungalows on the side streets, and the bars, salons and shops on the avenue.

  • Local South Tampa installers
  • Free written quote
  • No-obligation estimate

Design example: lounge floor glowing under black light
Design example: lounge floor glowing under black light
Design example: flake floor with UV-reactive chips under black light
Design example: flake floor with UV-reactive chips under black light
Design example: showroom floor with neon UV-reactive ribbons
Design example: showroom floor with neon UV-reactive ribbons

Design examples (AI renderings) to show the look. Not photos of past jobs.

What does a garage floor cost in SoHo (South Howard)?

Every floor is quoted in person. The price depends on the slab, the repairs it needs, the size and the finish, so someone looks at it first and you get a written number before any work starts.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

What should SoHo homeowners and businesses know before coating a floor?

Along South Howard the floors are tight townhome garages and busy commercial rooms, so access, parking and after-hours scheduling shape the job.

SoHo is South Tampa's restaurant and nightlife strip, with older bungalows on the side streets and newer townhomes filling in between. Residential garages here are tight: narrow single bays, tandem two-car garages and alley-loaded townhomes where every foot of floor gets used.

On the avenue itself, bars, lounges, salons and shops want a floor that looks like part of the design and stands up to a lot of feet. That is where UV-reactive and metallic finishes earn their place: under black light, the floor becomes part of the room.

Parking and access on Howard

Street parking is scarce on and near South Howard. The visit plan covers where the crew and equipment go, especially for alley-loaded townhomes.

Bars and lounges

Floors in bars take spills, grit and heavy traffic. The topcoat is picked for wear and cleaning, and a UV-reactive finish can be laid to glow under the room's black lights.

After-hours work

Businesses on the strip usually stay open during the day and busy at night. Work is planned for the hours that suit the business, and the floor gets enough time to cure before it opens again.

How your floor gets done, step by step

Free visit and written quote

Someone looks at the slab, measures the space and shows you physical samples of each finish, including the glow and black-light options. You get a written price before anything is booked.

Moisture test

Moisture coming up through concrete is the most common reason coatings lift, so the slab is tested before a system is chosen. Where it reads high, a moisture-tolerant primer goes down first.

Diamond grinding

The surface is diamond-ground with a vacuum attached to keep dust down. Grinding opens the concrete so the coating bonds into it instead of sitting on top, which is what makes a floor last.

Crack and joint repair

Cracks, pits and damaged joints are filled and ground flush so they do not show through the finish.

Base coat and finish

The base coat goes down, then the look you picked: flake broadcast edge to edge, metallic pigment worked by hand, or glow-in-the-dark or UV-reactive pigment in its own layer.

Clear topcoat and walkthrough

A clear topcoat seals the finish and takes the wear. You walk the floor with the installer and get written care instructions and when it can take foot traffic and cars.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions SoHo (South Howard) homeowners ask

Rather just ask?
Is it durable enough for a busy bar?

Yes, with a topcoat picked for heavy traffic, spills and daily cleaning. A busy floor will need that topcoat refreshed sooner than a home floor, which is a recoat, not a new floor. The quote visit covers traffic and cleaning so the system fits the room.

Can you do a glow floor for a bar or lounge?

Yes. A UV-reactive coating glows under black light and looks like a regular gloss or metallic floor in normal light. The quote visit looks at the room's lighting so the glow lands where you want it.

How long is a floor out of use?

It depends on the system and the temperature. Light foot traffic is usually possible within a day or two, with longer before heavy use. You get the timing in writing with the quote.

My townhome garage is tandem. Does that change the price?

It is priced by the real square footage. A long, narrow tandem garage is measured as it is, not counted as a standard two-car bay.

Book the visit

(656) 249-9690

    Also serving

    Bayshore Epoxy Floors works across South Tampa. Back to the main site.

    Specialty finishes

    CallGet a free quote